Universal Recloser Control
URC-II Simple and Comprehensive with DNP 3.0 Communication
ICMI introduces its URC-II featuring advanced technology in a simple to implement package that will be a cost effective alternative to existing recloser controls. It will easily retrofit to most mechanisms using Kyle/Cooper Form 3, 3A, 4, 4A, 4C, Form 5, FXA, and FXB controls.
New:
URC-II Presentation
URC-II CONFIGURATION UTILITY INSTALLATION AND OPERATING GUIDE
Features and Functions
- Superb - easy configuration with RS232 - SCADA ports – Flash drive - Fiber optics communications.
- Operates most three phase trip/close mechanisms using a 14-pin MS recloser connector
- Uses Windows-based software
- Trips on Phase, Ground, and High Impedance Faults
- RMS calculation for Phase, Ground. and Voltage
- Power calculations for VA, VAR, Watts
- Sequence coordination for down line devices
- “Cold Load” pickup with adjustable time delay
- Ground Trip precedence
- Sensitive ground trip
- Separate curves for Phase, Ground, and Cold Load Pickup
- High current trip
- High current lockout
- Demand and Instantaneous metering and main contact wear
- Data/Event recording
- Supervisory utilizing DNP 3.0
- Over 40 alternative settings and time/current trip curves available
- Non reclose and Hotline tag - lockout
PC Software features
Configuration Utility Microsoft Windows®-compatible program that let the user from the
convenience of a pc to setup the control and save the settings to a USB flash drive
(also called memory stick). The user only needs to take this USB flash
drive to the control to upload the configuration settings.
The Configuration Utility contains the 40 standard curves and allows the user to generate custom design curves. The control is designed
so that 11 custom curves can be uploaded into the control.
The control can be set so that it logs every 10 seconds and for event 5 wave cycles the rms values are recorded.
Cabinet and Options
- Powder coated aluminum cabinet, 9x14x22 inches - less than 30 lbs.
- Dual padlock able, gasketed side door
- Twin 7 amp/hour backup battery with intelligent battery power management
- Optional 100w space heater
- Standard front 120VAC GFI plug
- Optional wireless communications – radio/RTU/etc